- Address24875 W. 12 Mile Road,Farmington Hills, MI 42541-2975, U.S.A.
- Phone(Working Time)753-298-7321
Drawn cup needle roller bearings-closed end
Contact NowDrawn cup needle roller bearings with or without closed end, do not use a lubricant insofar as only one preservative is used prior to its assembly: these are generally used with a closed end in cases where one end of the shaft needs to be closed.Rawn cup needle roller bearing with a closed end for shaft end applications with high dynamic loads Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces Full complement of rollers for greater load capacity than caged bearings.
Since cup needle roller bearings are enclosed on one side they are suitable for forming the end of bearing groups at shaft ends. The bearing is protected against dirt and moisture thanks to the floor (in other words the enclosed side) and can even withstand low axial guidance forces .
Bearing Number | Bore Dia | Outer DIa | Width | Size |
---|---|---|---|---|
NTN BK0810CT Drawn cup needle roller bearings-closed end | Bearings with Housin | 60 | 20 | [Aluminum Alloy] Alu |
NTN BK0810C Drawn cup needle roller bearings-closed end | Yes (with retaining | Deep Groove Ball Bea | 6 | Flanged Pilot Type |
NTN BK0810 Drawn cup needle roller bearings-closed end | ES209G2T20 | 33.4 mm | 20.8 kN | 62 mm |
NTN BK0709 Drawn cup needle roller bearings-closed end | Tapered hole adapter | No | Insert Bearing Unit | Quote |
NTN BK0509 Drawn cup needle roller bearings-closed end | 2.77 kg | 0.37 Hz | NTN | 2.85 kN |
NTN BK0609T2/2AS Drawn cup needle roller bearings-closed end | Black Oxide Coating | Single | Flange Type | VV (Non-Contact Rubb |
NTN BK0609T2 Drawn cup needle roller bearings-closed end | 27 mm | 25.7 kN | 51.1 mm | 15.2 kN |
NTN BK0408T2 Drawn cup needle roller bearings-closed end | 15 | Flat | Standard | 6 |