
- BEARING CORP.OF AMERICA
- Ball bearing plummer block units Bearing units,Insert bearings Bearing washers for cylindrical and needle roller thrust bearings
- Address24875 W. 12 Mile Road,Farmington Hills, MI 42541-2975, U.S.A.
- Phone(Working Time)753-298-7321
Double row self aligning ball bearings
Contact NowSelf-Aligning Double Row Ball Bearings Other Types of Spherical Bearings. There are other types of "spherical bearings" including spherical... Self-Aligning Double Row Roller Bearings Also Available. Selecting the Correct Self-Aligning Bearing. Double row self-aligning bearings utilize an inner ring with two rows of balls in two deep raceways, and an outer ring with a single spherical raceway. In this way, the inner and outer rings can be misaligned relative to each other. The resulting effect is a comparatively large angle imposing moment loads upon the balls.
Double - row bearings handle thrust loads in both directions. Open bearings dissipate heat more efficiently than shielded and sealed bearings. Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
30,000 mm x 62,000 mm x 20,000 mm SNR 2206 Double row self aligning ball bearings
0.5313 in | Uncoated |
3-5/8 in | 1.0000 in |
25 mm x 52 mm x 18 mm NTN 2205SKC3 Double row self aligning ball bearings
Double-Row Filling S | 25 mm x 52 mm x 18 mm |
25 mm x 52 mm x 18 mm NTN 2205SC3 Double row self aligning ball bearings
16000 | Steel |
Two Rubber Seals | In Stock |
25 mm x 52 mm x 18 mm NTN 2205SK Double row self aligning ball bearings
52100 Bearing Steel | 1.1250 in |
Round | Pressed Steel |
25 mm x 52 mm x 18 mm NTN 2205S Double row self aligning ball bearings
Cast Iron | 1.8750 in |
207 | Lubrication Fitting |
25,000 mm x 52,000 mm x 18,000 mm SNR 2205KEEG15 Double row self aligning ball bearings
4-1/4 in | 140400 lb |
5000 | Spherical Roller |
25 mm x 52 mm x 18 mm NTN 2205L1C3 Double row self aligning ball bearings
UCFQ | 63.5 mm |
52100 Chrome Steel | 30 to 180°F |
25,000 mm x 52,000 mm x 18,000 mm SNR 2205G15 Double row self aligning ball bearings
Uncoated | None |
2-7/16 in | Maximum of +300 |
25 mm x 52 mm x 18 mm SNR 2205KC3 Double row self aligning ball bearings
053893593876 | 2.7500 in |
Solid Pillow Block | 3.1250 in |
25,000 mm x 52,000 mm x 18,000 mm SNR 2205EEG15 Double row self aligning ball bearings
C0 | Not for Ball Screws |
10 mm | ABMA |
25,000 mm x 52,000 mm x 18,000 mm SNR 2205 Double row self aligning ball bearings
0.234 lb | -22 to 400°F |
3926904590.US | 0.6250 in |
20 mm x 47 mm x 18 mm NTN 2204S Double row self aligning ball bearings
1000 | Open Type |
15.50 KGS | 1600 |